• High voltage insulation resistance and ductor (low resistance ohmmeter) testing of 13.8kV and 4.16kV switchgear and MCC’s per NETA standards.
• Testing 13.8kV vacuum circuit breaker tests including DC insulation, AC Hi-pot, power factor and bottle integrity tests.
• Testing 4.16kV starters per NETA standards. DC insulation, AC Hi-pot, power factor
• HV Current Transformer (CT) testing to include winding resistance, polarity, ratio and mag. curves using Megger Relay CT (MRCT) test equipment or equivalent.
• Potential Transformer (PT) testing to include winding resistance, polarity and ratio.
• Testing of SEL relays at set point using Doble relay test set or equivalent. Relay types are SEL-751, SEL-787, SEL-710-5 & SEL-735 meter.
• Protection test to include trip testing, secondary injections and primary injections.
• Testing of oil filled power transformers per NETA standards. Tests to include ratio and winding resistance on all taps, power factor and excitation testing, and tests on transformer ancillary devices and oil testing.

• Identify, diagnose, and resolve issues encountered during the commissioning and testing phases.
• Work collaboratively with other technicians, engineers and contractors to address and rectify problems.
• Compose RFI’s for technical issues with design.
• Implement corrective actions and retest systems to confirm successful resolution.

• Prepare comprehensive reports summarizing the commissioning and testing process, outcomes, and any recommendations for improvement.
• Ensure all documentation complies with NETA standards and company’s specifications.
• Complete equipment checks using Hexagons SMART completion system.

• Ensure all work is performed in compliance with OSHA, state and federal regulations.
• Participate in safety training and promote a culture of safety within the commissioning team.
• Adhere to site safety protocols, particularly when working on live electrical systems.

• High school diploma or equivalent required.
• Associated degree in Electrical Engineering or Technology.
• Journeymen or Master Electrician license preferred.

• Minimum of 5-10 years of experience in commissioning and testing High/Medium voltage electrical systems.
• Proven expertise in the use of electrical test equipment. E.g. Doble, Megger, Omicron, Vanguard.

• Strong knowledge of electrical theory, high voltage systems, and electrical codes.
• Proficient in interpreting blueprints, schematics, and technical manuals.
• Excellent analytical and problem-solving skills
• Willing to travel for work to the USA

• Experience working with high to medium-voltage systems
• Relay experience
• Proficient in operating an insulation resistance tester
• Skilled in using AC/DC Hi-Pot Testers
• Competent with digital low-resistance ohmmeters
• Experienced with 3 Phase injection test sets
• Familiar with Transformer Turns Ratio test sets
• Capable of using Current Transformer test sets
• Able to operate a lumens meter
• Proficient in conducting Protection Relay tests
• Skilled in using Digital Voltage Meters and power quality analyzers
• Competent with Load Bank testing and troubleshooting
• Experienced with Battery testers
• Proficient in using temperature guns and circuit breaker test sets

• Instrumentation Knowledge: Proficiency in repairing, maintaining, calibrating, and adjusting industrial measuring and controlling instrumentation.
• Electrical Skills: Ability to work with electrical systems, including testing and troubleshooting equipment related to motors, generators, lighting, HVAC, transformers, and other electrical components.
• Technical Aptitude: Strong understanding of electrical theory fundamentals and practical application in commissioning processes.
• Testing and Validation: Experience in conducting tests using various electrical power test equipment such as insulation resistance testers, AC/DC Hi-Pot testers, ohmmeters, injection test sets, transformer ratio test sets, current transformer test sets, etc.

The ideal candidate will possess the following essential skills and qualifications:

• 5 years of industrial oil and gas experience; technical training with a science background or equivalent is preferred; good working knowledge of equipment, materials, techniques, and safeguards in respective discipline for maintaining and constructing a continuous process; basic knowledge of fluid dynamics and process control.
• Ability to read and understand instrument and electrical drawings; a high mechanical aptitude and the ability to comprehend and apply information in technical service manuals; excellent verbal and written communication skills; Good computer skills.
• Must speak, read and write in  English
• Have a valid drivers license for USA
• Must be legally eligible to work in USA without further certifications or authorizations Safety Compliance: Adherence to safety protocols and regulations, including knowledge of electrical codes and standards to ensure safe working conditions during commissioning activities.
• Problem-solving skills: Ability to identify and troubleshoot issues in instrumentation and electrical systems in a methodical manner.
• Reading and Interpreting Drawings: Proficient in reading and understanding instrument and electrical drawings, schematics, blueprints, and technical manuals.
• Communication Skills: Excellent verbal and written communication skills for documenting maintenance activities, writing reports, and effectively communicating with team members and stakeholders.
• Computer Proficiency: Good computer skills for data entry, using software tools for testing and analysis, and accessing technical documentation online.
• Mechanical Aptitude: High mechanical aptitude to comprehend and apply information from technical service manuals related to instrumentation and electrical systems.
• Analytical Thinking: Ability to analyze data, identify trends, and make recommendations for improvements during commissioning processes.
• Teamwork and Collaboration: Capable of working collaboratively with other technicians, engineers, and project managers to achieve commissioning objectives and ensure project success.
• Attention to Detail: Thoroughly inspecting and testing instruments and systems to accurately diagnose faults and ensure proper functioning.
• Continuous Learning: Willingness to stay updated with industry trends, new technologies, and best practices in commissioning instrumentation and electrical systems.
• Adaptability: Flexibility to work in various environments, handle changing project requirements, and adjust to evolving commissioning processes and procedures.

 Electrical, Mechanical or Instrument Engineering Technologist

• 0-3 years of work experience and education in the technology or engineering field of study
• Must have attended and graduated from a recognized Canadian institution. Excellent people skills.
• Good communication both verbal and written in the English language.
• Attention to detail and organization
• Ability to work in both an office environment and field environments.
• Valid drivers license in Canada, with good standing.
• Must be eligible to work outside of Canada
• Willing to travel for work (FIFO)
• Appropriate computer skills, which includes: Microsoft Office Suite , Bluebeam, Adobe Pro

Candidates will have to perform a pre-screening Drug and Alcohol test prior to employment.  Criminal checks maybe required for some clients and work locations.

Location: Field assignments in Canada, USA and potentially other Countries.

Please note that only qualified candidates will be contacted.

• Electrical
• Mechanical
• Process or Chemical
• Instrumentation

The ideal candidate will possess the following essential skills and qualifications:

• Must be eligible to work in the United States or residence of the United States and eligible to work in various locations.
• Minimum of 3 years’ experience in Pre-Commissioning, Commissioning and Start-up and early operation of processing facility.
• Minimum of 5 years’ experience in an industrial processing facility where you held a maintenance, operations or commissioning position.
• Must hold a valid
  – Industry recognized Trade Certification, or
  – Technology Diploma or
  – Engineering Degree
• Certification, Diploma or Degree from a recognized Trade Program, Technical College or University and in one of the following disciplines in the Electrical, Instrument, Mechanical, Process or Chemical Minimum of 5 years of experience in Heavy Industrial, Oil & Gas industry, Power Generation, Green Energy Refining, Petrochemical or related industries required

• Excellent working knowledge of process equipment, materials, techniques, and safeguards in respective discipline for maintenance and construction of a continuous process petrochemical plant;
• Ability to read and understand technical drawings and schematics;
• High mechanical aptitude and the ability to comprehend and apply information in technical service manuals;
• Excellent verbal and written communication skills
• Demonstrated experience of Inspecting and Testing of process equipment and systems to diagnose faults using testing devices
• Must demonstrate strong computer skills in Microsoft word, excel and the ability to learn client software programs
• Writing maintenance reports
• Repairing and adjusting system components or removing and replacing defective parts
• Ability to Calibrating components
• Performing scheduled preventative maintenance work
• Observing safety in accordance with government and company standards

All applications will be reviewed, only the successful ones will be contacted. All others will be kept on file for future considerations.

The ideal candidate will possess the following essential skills and qualifications:

• 5 years industrial oil and gas experience; technical training with a science background or equivalent is preferred; good working knowledge of equipment, materials, techniques, and safeguards in respective discipline for maintenance and construction of a continuous process, basic knowledge of fluid dynamics and process control.
• Ability to read and understand instrument and electrical drawings; a high mechanical aptitude and the ability to comprehend and apply information in technical service manuals; excellent verbal and written communication skills; Good computer skills.
• Must speak, read and write in  English
• Have a valid drivers license for Canada
• Must be legally eligible to work in Canada without further certifications or authorizations

Education

• Inter-provincial Trade Certification (Instrumentation)
• Certified Technologist (Instrumentation)

• Consulting manuals, reading and interpreting circuit diagrams, blueprints and schematics
• Inspecting and Testing the operation of instruments and systems to diagnose faults using testing devices
• Writing maintenance reports
• Repairing and adjusting system components or removing and replacing defective parts
• Calibrating components and instruments
• Performing scheduled preventative maintenance work
• Observing safety in accordance with government and company standards.

All applications will be reviewed, only the successful ones will be contacted. All others will be kept on file for future considerations.

The applicant must be verse in fundamentals of electrical theory. This knowledge will allow the applicant to apply standard NETA or IEEE testing practices to validate the integrity of electrical equipment.   Testing will involve both low and medium voltage equipment and in minimal applications involving high voltage.  The applicant must be familiar with completing the following tests:

• Insulation resistance testing (Megger)
• High potential testing (Hi-Pot)
• Digital low resistance testing (DLRO)
• Primary or secondary injection
• Polarization index test (PI)
• Dissipation factor test
• Transformer Saturation testing
• Battery discharge testing
• Auto Transfer scheme testing
• Generator load acceptance and rejection testing
• Unloaded and loaded operational tests
• Lumens testing
• Protection relay testing
• Vacuum breaker testing

• Technical Diploma or Degree from recognized Institution in Canada
• Journeyman apprenticeship completed/ and Interprovincial certification
• Minimum 3 Years’ experience in testing or maintenance
• Attention to detail and organization
• Ability to work in both an office environment and field environments.
• Valid drivers license in Canada, with good standing.
• Must be eligible to work outside of Canada
• Must be legally eligible to work in Canada without further certifications or authorizations
• Must speak, read and write in English
• Willing to travel for work (FIFO)
• Appropriate computer skills

• Problem solving: Applicants need to have the aptitude to troubleshoot problems in a methodical manner to identify the issues.
• Logic: Applicants need to be able to read electrical blueprints and prove all control through testing in systematic manner.
• Adaptable: Working in tight quarter with wires, using hand tools and handling small components requires manual dexterity and good color visibility.
• Observation: Applicants need to review electrical installations and observe any violations to the Canadian Electrical Code.
• Integrity:  Applicants must be willing to work within their abilities and defer to assistance in order to maintain quality and integrity.

• Test electrical equipment.
• Replace and repair damaged or failed electrical equipment
• Troubleshoot & fix faults to electrical systems including; Motor control centers and switchgear, ac or dc motors, Generators, UPS, Lighting and distribution systems, Heat trace systems, Power distribution transformers, HVAC equipment, contactors, protection relays, NGR, circuit breakers, ATS, etc
• Familiar with programmable logic controllers.

• High to Medium Voltage experience
• Insulation resistance tester
• AC/DC Hi-Pot Tester
• Digital low resistance ohmmeter
• 3 Ph injection test set
• Transformer Turns Ratio test set
• Current transformer test set
• Lumens meter
• Protection Relay test set
• Digital Voltage Meter, power quality analyzer
• Load bank
• Battery testers
• Temperature gun and circuit breaker test set.

All applications will be reviewed, only the successful ones will be contacted. All others will be kept on file for future considerations.

• Technical Diploma or Degree from recognized Technical Institution (attach certificate with application).
• Interprovincial Industrial Mechanic or Millwright Journeyman Certificate (Red Seal).
• Minimum 3 Years’ experience in Mechanical industrial testing or Millwright/Mechanical Industrial maintenance and or related commissioning experience.
• Attention to detail and organization
• Ability to work in both an office environment and field environments.
• Valid drivers license in Canada, with good standing.
• Must be eligible to work outside of Canada
• Must be legally eligible to work in Canada without further certifications or authorizations
• Must speak, read and write in English
• Willing to travel for work (FIFO)
• Appropriate computer skills

• Read blueprints and schematic drawings to determine work procedures. Dismantle machinery or equipment, using hammers, wrenches, crowbars, and other hand tools.
• Moves machinery and equipment, using hoists, dollies, rollers, and trucks.
• Assembles and installs equipment, such as shafting, conveyors, and tram rails, using hand tools and power tools.
• Constructs foundation for machines, using hand tools and building materials, such as wood cement, and steel.
• Aligns machines and equipment, using hoists, jacks, hand tools, squares, rules, micrometers, lasers, and plumb bobs.
• Assembles machinery and bolts, welds, rivets, or otherwise fastens them to foundation or other structures, using hand tools and power tools.
• May operate engine lathe or milling machine to grind, file, and turn machine parts to dimensional specifications.
• Required repair and lubricate machinery and equipment.
• Selects cables, ropes, chains, pulleys, winches, blocks, and sheaves, according to weight and size of load to be moved.
• Attaches load with grappling devices, such as loops, wires, ropes, and chains, to crane hook.
• Sets up, braces, and rigs hoisting equipments, using hand tools and power wrenches.
• May direct workers engaged in hoisting of machinery and equipment.
• Work within precise limits or standards of accuracy.
• Look at flat drawings or pictures and visualize how they would look as solid objects.
• Work at heights without fear.
• Use logical step-by-step procedures in work.
• Plan work and solve problems.
• Make decisions based on measurable information.
• Perform a variety of duties which may change often; and operate machinery.

Must be capable of

• Coordinate eye-hand movements;
• Use hands and fingers fully; reach for, manipulate, and feel objects; stoop, kneel, crouch, and/or crawl;
• Climb and maintain body balance on ladders, scaffolding, or high structures; and see and hear well (either naturally or with correction);
• Lift and carry objects weighing up to 100 pounds.
• Stoop, lay, bend or squat for long periods of time.

All applications will be reviewed, only the successful ones will be contacted. All others will be kept on file for  for future considerations.

Must have the ability to work effectively and cooperatively with people in various functional areas. The primary duties required by this role include:

• Ability to perform commissioning and start up duties in accordance with the company’s policies and procedures to maintain a safe work environment.
• Strong understanding of Permit to Work Systems.
• Commissioning  and operations support and assistance.
• Issue safe work permits and gas testing as required.
• Ability to perform Mechanical Isolation of Process equipment ensuring zero stored energy and equipment is safe for maintenance activities.
• Commission and start up of equipment and plant operating systems.
• Develop, write and update procedures, lockout sheets and reading sheets. Procedures include commissioning, start up, shut down and standard operating procedures.

• Detail oriented and strong organizational skills.
• Carry out assigned work in an effective and timely manner.
• Demonstrated strong written and effective verbal communication skills.
• Computer skills and data management skills.
• Read and understand P&ID’s.
• Excellent interpersonal skills.
• Knowledge of plant and process systems.
• Strong plant operating ability.
• SAGD experience needed.
• Well Pad experience, and LOTO. an asset
• Attention to detail and organization
• Ability to work in both an office environment and field environments.
• Valid drivers license in Canada, with good standing.
• Must be eligible to work outside of Canada
• Must be legally eligible to work in Canada without further certifications or authorizations
• Must speak, read and write in English
• Willing to travel for work (FIFO)

• Oil & gas or related industry experience.
• 5 to 10 years of plant operating experience.
• Control room operating experience with distributed control systems.(DCS)
• Prior commissioning and start up experience would be an asset.
• Fourth, Third or Second Class Power Engineering Certificate would be an asset

All applications will be reviewed only the successful ones will be contacted. All others will be kept on file for a period of 1 year for future considerations.